There is a direct relationship between the production of ball mill parts and product quality work efficiency

The main machine includes a cylinder body, a liner made of a wear-resistant material in the cylinder body, a bearing which carries the cylinder body and maintains its rotation, a driving part such as a motor, a transmission gear, a pulley, a corner belt, etc. The parts, generally not the main components, have an internal spiral in the feeding port of the feeding end, which can be referred to as the spiral blade inside, and the inner spiral in the discharging port of the discharging end can also be referred to as the spiral blade. In addition, at the discharging end If a screw conveyor is used in the auxiliary equipment, there will be parts called spiral blades in the equipment, but strictly speaking, it is not a part of the ball mill.
What is the relationship network that regulates the efficiency of the ball mill ?
The match of the ball diameter is also very important. It is important to note that the size of the ball is large or small, which can improve efficiency. The current is increased to increase the speed; the recipe is changed to increase the strength and weight of the ball (to increase its inertia); the grinding time is independent of the efficiency, because the efficiency itself is the ratio of the workload to the time. The method to increase the speed is also to use a frequency converter and to change the deceleration device (if there is a deceleration device). In addition, if it is necessary to add water during ball milling, the necessity of adjusting the moisture content of the mill into the mill material is not empty talk, and the amount of water added has a great influence on the ball mill efficiency. The efficiency of ball milling can be increased by adding dispersants.
The wet ball mill can improve the work efficiency by controlling the speed of the equipment. There are two specific implementations:

The appropriate improvement of the deceleration device can also have a certain effect, and the output per unit time increases. Conditional concentrators can also choose to install frequency converters to adjust the ball mill speed can also achieve satisfactory results. In addition, the ball diameter of the ball mill is also very important. To make the diameter of the ball stone vary from small to large, it is possible to grind the ore with different sizes in the grinding chamber. This will also improve the efficiency of the ball mill.

Secondly, for the ball mill , the increase of current is to increase the rotational speed, the rotational speed is high, and the work efficiency of the ball mill is naturally high. The motor with a large amount of power can be roughly determined according to the tonnage of the grinding body load. However, it should be noted here that increasing the current must be within the rated power range of the ball mill and cannot exceed a large load. If the current is too large, the mill will be burned and the loss will be large.

Please visit for details

Telescopic Boom Truck Mounted Crane

JIANGSU OUCO HEAVY INDUSTRY AND TECHNOLOGY CO., LTD , https://www.marinelifting.com