What is the difference between petrol tourist cars and electric sightseeing cars?
Electric Sightseeing Vehicles have good practicality and environmental performance. Electric Sightseeing Vehicles have a wide range of uses. They are also favored by more companies and markets. Electric Sightseeing Vehicles have not yet been put into use. Previously, some large-area tourist attractions were using pedal tricycles and bicycles as a means of transport. However, for those elderly people who are old, it is too much to consume for a long time. So what is the difference between an electric sightseeing car and a gas sightseeing car? 1. The driving methods used between the two are not the same, and the use of the environment is also a certain degree of difference. The driving mode of electric tourist vehicles is driven by electricity. Gasoline tourist cars are naturally driven by gasoline. From a literal point of view, everyone should know that the power of tourist cars using gasoline must be higher than that of electricity. Stronger. Electric sightseeing vehicles are suitable for use in some light-moving seasons that are slow on foot, or for playing some of the more recent attractions. Gasoline Sightseeing Vehicles can be used in areas where there are long distances, rough roads, long slopes, and poor road conditions. 2. The working status of the electric sightseeing car and gas sightseeing car are different. In general, electric sightseeing vehicles can be completely turned off and can be started during use. This way of use is more convenient. Gasoline Sightseeing Vehicles are exactly the opposite, and the latter are generally less flame-extinguishing when they are waiting and waiting. 3. The emissions of electric vehicles and gasoline vehicles are also very different. The use of gasoline will emit a large amount of exhaust gas, and there will be some pollution in the surrounding environment, while the use of electric relative As a result, it can play a very good role in environmental protection, and when the electric sightseeing vehicle is running, it will not rule out any waste and harmful gases, will not cause noise, and will not cause any impact on the environment. (Text / Sun Ni)
X Ray Machine
The system matches with metal ceramic X-ray tube and high
frequency solid insulate industrial X-ray HT generator, it applies forced
cooling system to make sure X-ray machine can normally continuous work for 24
hours. The dimension of this kind of small focus X-ray tube is half of
traditional focus tube, geometry unintelligibility is an important factor which
affects image quality, if focus bigger, correspondingly, geometry
unintelligibility is deeper, and also makes image edge much more blur; if focus
smaller, geometry unintelligibility is lighter, it can improves image quality
at same time, also focus is smaller can inspect smaller failure which is favor
to improve X-ray RTR inspection stability.
The controlling part of system is researched and
manufactured by ourselves, the intelligent main control PLC works matches with
touch screen, beautiful and complete functional stainless steel panel that can
display and adjust parameters much more convenient. When high voltage of system
opens, there will be red light alarming signal outside of protect door, here
installs interlock devices between lead door and system, in the case of opening
lead door, system will stop radiation at once to assure safety of operators.
Butt Weld Pipe RTR System,Boiler Pipe RTR System,Casting RTR System,Wheel Hub RTR System Dandong Nondestructive Testing Equipment Co., Ltd. , http://www.ddchinaxray.com
