Car maintenance tips, some important small parts

September 13, 2019

Most car owners love their car and pay attention to their maintenance. But every car always has some maintenance parts that we can't reach or think of. Although these parts are difficult to reach, they have a vital effect on driving safety, or can affect the braking performance and fuel consumption of the car, and some even affect the safety of the owner.

Mr. Car Mr. summarizes a few small positions, please pay attention to the majority of car owners:
The old fuse line of the ignition line will affect the vehicle's power and fuel consumption. The spark plug owners basically know that some owners will replace the spark plug by themselves, but the ignition line is rarely noticed by everyone. Some car owners sometimes wonder why their car has nothing wrong with it, but they don't like fire. The fuel consumption is high and the power is poor. If it is not caused by other reasons, Mr. Car recommends that you check the ignition line.

The distributor is connected to the distributor and the spark plug at both ends of the ignition line. It is the path that is transmitted to the engine's electric spark during driving. Due to the high frequency of use and the harsh working environment, it is prone to aging and damage, resulting in insufficient ignition energy and seriously affecting vehicle dynamics. And fuel consumption. Mr. Car recommended that the vehicle change the ignition line every 20,000 kilometers.

If the brake disc has clear scratches, it is recommended to replace the new brake disc. The brake disc is believed to be familiar to everyone. At present, more and more vehicles are gradually transitioning from the brake configuration of the front disc to the rear disc. The advantage of using a disc brake is that it has better heat dissipation and is easier to clean and replace.
Most car owners think that the brake pads are more likely to wear than the brake discs. They do not pay enough attention to the brake discs. In fact, the disc and the sheet are all interacting with each other, the contact friction will be worn, and the brake disc surface is more than the brake pads. Smooth and easily affected by the rough surface of the brake pads.

The brake pad itself is a wearing part, but when we check the replacement of the brake pad, we should also pay attention to the condition of the surface of the brake disc. If there is a clear scratch, it is recommended to replace the new brake disc to avoid unexpected consequences.

Wiper maintenance <br> Regular cleaning and prolonging life There are not many opportunities for driving on rainy days, and there are relatively few opportunities to use wipers. Therefore, some car owners do not pay much attention to the abnormal state of the wiper blades. The problem is usually very serious until the effect of the wiper is affected.
In addition to daily use, if there is less water on the front windshield, it is easy to increase the wear of the wiper and affect its level. When there is a strong thing on the front windshield, such as pigeons and other dry meat droppings, avoid using a wiper.
Since the material of the wiper blade is mainly rubber, it will age and harden for a long time. The owner can buy a rubber curing agent from the auto supply store and spray it on the rubber part of the wiper blade every month to protect the rubber strip. At least 30% - 50% of the life of the rubber strip can be extended.

In addition, when the wiper is found to be incompletely wiped, it is also possible to purchase a wiper blade repairer that rubs against the rubber portion of the wiper blade to repair the irregularly worn portion.

If, during use, the wiper has been left with slender streaks on the windshield, it is difficult to see the outside world. This may be because there is foreign matter on the wiper or the edge is worn. The treatment method should not be rushed to replace. First, clean the edge and replace it if the symptoms are still not eliminated.

Curve Conveyor Systems are parts of our Conveyor Systems. The Curve Conveyor systems include curve Belt Conveyor Systems and curve Roller Conveyor Systems. For the curve Belt Conveyor systems, our normal belts is PVC belts and rubber belts. The Roller Conveyor systems are made with rollers, the roller material can be galvanized roller, stainless steel roller, roller with rubber cover which is widely used in logistic and post transporting conveyors. The curve conveyor systems are also named curve conveyor tables, which can connect all kinds of conveyor systems to be a circle structure. The curve conveyor systems can be designed to 45/60/90/180 degree conveyor table. The curve conveyor systems can save the space of the your plant, then it can save your cost.

Curve Conveyor Systems
Curve Conveyor Systems,Curve Conveyor,Curve Roller Conveyor,Powered Curve Conveyor
Shenzhen Hongdali Machinery Co.,Ltd , https://www.conveyortop.com