Talking about the operation of sewage truck

Sewage trucks play a pivotal role in the city. The majority of roads and rivers rely on it. Sewage trucks can be described as “good helpers” for people to clean up the city. However, the operation of sewage trucks is not as simple as imagined. There are caves, but it is not very difficult to understand. Today, I will introduce to everyone the problems that should be paid attention to in the operation of sewage trucks . I hope to help everyone.

First: Keep the proper number of rotations for the vacuum pump

If the vacuum pump turns too fast, it will cause the heat to increase, but if the number of turns is too small, the engine and other parts will also have problems and reduce the life. Therefore, we must adjust the position of the hand throttle according to the pump type to ensure that the appropriate number of rotations is achieved.

Second: Since the unloading tank is on the flat ground

The unloading of the tank on an uneven road surface can cause damage to the components, resulting in breakdowns and possibly causing a roll-over accident.

Third: Remember to open the tank after the tank door in the dump tank

After the locked bolts are opened, the tipping tank is slanted and the rear door is lifted to a proper angle. We must remember that when the rear tank door is closed, you must not raise the tank, otherwise it will cause a rollover.

Fourth: When the oil pump and the vacuum pump force the engine to slow down, and fully stepped on the clutch pedal, open the power take off switch, slowly release the clutch.

Fifth: When the car is running, the vacuum pump and the oil pump are in a non-operating state.

Sixth: Do not inhale dirt larger than the diameter of the hose.

Seventh: When repairing the vehicle or entering the vehicle maintenance, it is necessary to use a support bar to support the body to ensure safety.

Eighth: When there is dirt on the car, it must be driven slowly. Do not make a sharp turn or brake, which may cause accidents.

The above is the operation of the sewer truck . We must keep in mind that no accidents will occur during work. I think we can all back down some of the above-mentioned operations, record them in the mind, or extract them and paste them into the sewer truck. This will help you become more familiar and reduce accidents so that the sewage truck can help people build a better city.

C/U/ Channel & T Bar Roll Forming Machine. Those machines are also for making building material.

C/U/ Channel is the machine for making C track U channel for making ceiling, drywall and others.

T Bar Roll Forming Machine is for making main T gird, cross T gird which are only for ceiling.

This machine can be sorted two type according to the function. One is for drywall roll forming machine, another is ceiling roll forming machine.

C/U/ Channel & T Bar Roll Forming Machine

T Bar Roll Forming Machine, C/U Channel Roll Forming Machine, Light Keel Roll Forming Machine

Zhongtuo Roll Forming Machinery Co., ltd , https://www.frameforming.nl