Novice for the first time with Jiangling commercial vehicles need to pay attention to what the high speed
I bought a Jiangling commercial vehicle , but it is also a novice driver. Sometimes, because of business needs, it needs to be on a high speed. What do you want to pay attention to when you are on high speed? Before the high speed must be self-test, look at the JMC commercial vehicles all parts are intact, especially tires. Also remember to take the jack, although many car dealers will send one, but it is best to buy a good quality. Half-way puncture on the highway can only rely on oneself. Otherwise, the average amount of trailer fees is unaffordable. Before departure, see how you want to sit in the most comfortable place. Pull your seat forward, backrest a bit, and place a pillow on your neck so that you can still rest on the pillow while you look at the road surface. This should be the best. One of the driver's favorite rides. When you grab the steering wheel with both hands, you can ensure that your hands do not have to be fully straightened. When you have less cars on the highway, let yourself be relaxed. If you drive to 130, don't be nervous. It's good to slowly put some oil. The eyes do not always keep an eye on the front and look at the surrounding landscapes so that the eyes are not prone to fatigue. This can also take time to look into the back mirror and observe the situation behind other cars. Observing the frequency of retrograde mirrors is mainly determined by the fact that there are not many cars at the time. A road that is straight and open is different from the road that divides the traffic in the Pearl River delta in the Yangtze River Delta at different minutes to ensure safety. Do not always hold your hands on the steering wheel, take turns to rest, put a hand on the bottom edge of the steering wheel to relax, keep the other hand in the upper part of the steering wheel can control the car, take turns resting. You can listen to cheerful music, it is best to make yourself excited and difficult to sleep. There is a personal chat next to it is a good way. Many people say that buses cannot talk to drivers. This should consider different situations. The bus driver's road conditions are complex and varied road conditions in the city. Drivers need to be fully focused on their surroundings in order to deal with car pedestrians or even children or other emergencies that may suddenly erupt. Therefore, he cannot be used by other drivers. Divided by things. For long-distance cars, especially on the high-speed roads, the road conditions are simple. In the normal situation where there are no cars, good vision and straight road conditions, the driver has to step on the accelerator and watch the backward mirror from time to time. This is boring. Without music, vocals, and other things, the odds of being trapped are 100%. The role played by the next person, in addition to chatting, is more important than the fact that the driver is not aware of the difficulties and timely reminder that the driver will force him to rest when he tries harder. Do not hesitate to meet if you do not know if you should be in front of the intersection, and immediately look at the navigation by parking. Don't miss the junction and revert back! After you drive through, you will find the next intersection! There is no luck. Before any braking, please see if there is a car behind. Whenever there is a car in front of all the lanes, choose the distance behind the car. When encountering a need for overtaking, flash ahead before overtaking to remind the car to accelerate again. Don't worry. If you have a lot of cars or pass by the village, you should walk in the city. Really sleepy to find a rest stop, do not support. Get off the bus, the toilet will soon be able to recover. I usually enter the rest station every two hours. Although driving at high speeds is very fast, novice drivers must pay attention to these matters, otherwise they are prone to accidents such as collisions. The consequences of a collision at a fast speed would be disastrous.
• Materials:
o Conductor: Cat65e F/UTP stranded, 26AWG, 7x0.16, bare copper
o Insulation: polyethylene with color marking on white cores
o Shield: individual foil for each pair, with general ground wire
o Outer jacket and boots: PVC, CMX, CM, CMR, leaded and lead-free as well as LSZH versions are available
• Nominal outer diameter: 6.0 ±0.2mm
• Color code: BL/WH-BL, WH, GN/GN-WH or BR/BR-WH
• Cable colors: grey, others colors from RAL and Pantone are available
• Mechanical characteristics:
o Cable to plug tensile strength: 9kgsf (90n) minimum
o Minimum bending radius: 22mm
o Storage temperature: -20 to +80°C
o Durability: 750 mating cycles
o Plug housing: UL 94-V0, UL 94-V2 and polycarbonate
o Plug contact material: 50μ-inch gold plating over 100μ-inch nickel-plated copper alloy
o Fire performance: IEC 332.1, VW1, IEC 332.3 versions available depends on the jacket type
o Product length: 0.5 to 100m (optional)
• Electrical performance:
o Contact resistance: 20mΩ (maximum)
o Voltage: 75V (maximum)
o Dielectric strength: 1,000V/ 1 minute minimum RMS
o Current: 1.0A (maximum)
o Insulation resistance: 500MΩ minimum at 500V DC
o Performance test: 100% Patch Cord test for Cat6A, Cat6 and optional for Cat5E Patch Cord
• Certificates: ISO 9001:2001, ISO 14001, OHSAS 18001, UL and REACH
• RoHS Directive-compliant
• Packaging: 1 piece/bag
• Production capacity: 20,000 pieces/day
• Unit price: USD 1.5 to 5.0/piece
Cat5E UTP Patch Cord, Cat6 Copper Patch Cord, Cat5E F/UTP Patch Cord Ningbo Excellence Communicated Connector Co., Ltd , http://www.patchcordmaker.com