Three-roller gate fault handling method and three-roll gate brake matters
Commerce Use Room Heating,Commerce Use Room Heater,Commerce Use Portable Heater,Commerce Use Space Heater Yinchuan Aini Industry And Technology CO.,ltd , https://www.aini-heat.com
First, the phenomenon of failure: three roller gate indicator light does not shine processing method: check the power supply or fuse Second, the failure phenomenon: the impact of sound when the three roller gate brake opening method: adjust the size of the damper three, fault phenomenon: three roller brake open When the gate has a squeak treatment method: adjust the four base screws of the electromagnet to reduce the electromagnet suction and closing clearance. IV. Failure phenomenon: The three-roll gate cannot be opened.
1, check the control board;
2, check the solenoid screws are loose or broken;
3, check the three-roll gate driver board, this time can be shorted to the driver board input (1 # open gate or 2 # open gate input), if the solenoid valve or green light reaction is normal five, failure phenomenon: three roller gate manual Not on the rod processing method:
1. Check whether the electromagnets of the power-off and drop rods absorb iron blocks;
2. Is there a DC12V power supply for the electromagnet with the power-off lever?
3. Check whether the electromagnetic device of the power-off and drop lever tops the spring plate in the turntable. If yes, move the entire device upwards so that the two devices do not come into contact with the three-roller gate during use:
1. Please swipe the card outside the yellow line. The gate must be in place and there is a direction indicator arrow to enter. During walking, do not stay in the channel or return before passing.
2. During the passage, do not enter into the passageway, and do not squeeze the card to avoid causing the card to open.
3. When you see that the gate is in open position, please do not forget to swipe your card (for time-delay closing function), do one card and one person's request.
4, maintenance work, cleaning the outside of the dust inside the chassis, mechanical connection parts plus lubricating oil, to ensure the normal operation of the equipment.
5, do not artificially damage the gate (man-made damage is not within the scope of the warranty).