Pool dipping resin gold extraction process

Anhui Guichi horse gold mine gold in collaboration with the Institute of Jilin Province, in 1990, succeeded in creating a pool of resin leaching gold extraction process. The mine adsorbs gold from the pool immersion liquid with NK884 weakly basic anion exchange resin, and the thiocyanate is desorbed. The principle process flow is shown in the figure. The comparison with the original process technical economic indicators is shown in the table.


[next]













































































Comparison of technical and economic indicators of two processes


project


New process (resin method)


Original process ( zinc wire replacement method)


Difference


Annual processing of minerals / t


18000


18000


 


Raw ore grade / (g· t -1 )


4.76


4.76


 


Cyanide consumption / ( k g · t -1 )


1.52


-0.5


 


Leach rate /%


72.1


65


7.1


Soluble gold recovery rate /%


97.03


90.09


6.94


Residual gold recovery of tailings / (g· m -3 )


1.17


2.94


-1.77


Total recovery rate /%


69.61


58.27


11.34


Annual gold production / ( k g· a -1 )


59.624


49.926


9.716


Gross output value / (10,000 yuan · a-1 )


286.28


239.64


46.64


Unit production cost / (yuan· t -1 )


70.35


76.71


-6.36


Total cost / (ten thousand · a -1 )


126.63


138.078


-11.448


Annual profit tax / (million yuan a-1 )


159.65


101.562


58.088


The deposit is an iron cap ore body, and the ore is highly oxidized and contains a large amount of mud. Since the mining in 1986, it has been produced by the pool immersion-zinc wire replacement process (the amount of ore processed is 60t/d), and the leaching rate is only about 65%. In 1990, after changing to the gold extraction process of the mineral mud pool, the leaching rate was increased to 72.10%; the sodium cyanide dosage was reduced by 25%; the free cyanide content in the tailings water was reduced from 920mg/t to 150mg/t. More than 4.8kg of gold was recovered; the benefit was increased by 570,000 yuan.
The successful application of resin pulp gold extraction process and pool immersion resin gold extraction process in China's gold production is a major advancement in China's gold production technology. With the rapid development of the gold industry, the ion exchange resin gold extraction technology will be greatly promoted.

Polyurethane Pump Parts

Not only does MUYUAN offer the complete pumps, we also offer the rubber pump spares parts for a series of pumps, they include the

- Impeller
-Cover plate liner

-Frame plate liner

-Throatubsh

-Back liner
-Others


The properties of the rubber material:
We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.


Except the Rubber Pump Parts, we can also offer the high chrome pump parts,polyurethane pump parts,Stainless Steel Pump Parts, Ceramic Pump Parts.

Polyurethane Pump Parts,Polyurethane Pump Impeller,Slurry Pump Spare Parts,Polyurethane Slurry Pump Impeller

SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com