Lubrication and maintenance of compound pendulum jaw crusher equipment
It is necessary to fill the bearings 1-2 times a week, and move the flywheel or pulley when filling, so that the oil can enter the bearing; The frame bearing and the movable body bearing open the bearing cap every three months, clean the bearing and add new oil ( molybdenum disulfide or lithium grease No. 2); The motor bearing is oiled once every three months, cleaned for half a year, oil changed, and the bearing is changed once a year. Second, equipment maintenance 1. Check the size of the discharge port 1 or 2 times per month. The discharge port will gradually increase due to the wear of the tooth plate; 2. Check the wear condition of the fixed jaw plate, the movable jaw plate and the side guard plate to replace the worn parts, and turn or replace the moving and fixed jaw plates; 3. Check the thrust plate, the bracket seat, the spring pull rod, and replace the worn parts; 4. Check the wear of the V-belt and adjust the tension and straightness of the V-belt. 5. Check the motor slip ring for pitting and spark burn. Grind the slip ring to smooth with fine gauze, replace the worn carbon brush, adjust the tightness of the brush holder, clean the dust on the motor and the power distribution cabinet, and check the electrical components. There is no heat and sparking phenomenon, and there is no looseness in the wiring everywhere, so that the power distribution cabinet is kept clean and the operation is reliable. Taizhou Pinsum Furniture Co.,Ltd , https://www.pinsumchina.com