Introduction to the design of the concentrator
1.1 Significance, purpose and requirements of the design of the concentrator Meaning beneficiation plant design The concentrator design is a scientific basis for project decision making, a design document for the project, and a hub for transforming science and technology into productivity. 2. Purpose of the design of the concentrator The purpose of the design of the ore dressing plant is to solve a series of problems such as raw materials, water and electricity supply required for the normal production of the building and installation phase, based on the characteristics of the ore, the results of the ore dressing test and the approved feasibility study report, etc., to meet the construction and production. Claim. 3. Requirements for the design of the concentrator (1) Design must be carried out in accordance with the basic construction procedures and approval procedures stipulated by the state. Keep the objective laws. The design requirements must be met and the design documents must conform to the content and depth of the corresponding design phase. (2) The design principles and plans shall be determined in accordance with the relevant guidelines, policies and regulations of the state construction, as well as procedures and norms. (3) Before the design, we must conduct a serious investigation on the site, carefully analyze the construction conditions, and fully grasp the basic materials needed for the design. (4) Try to use high-efficiency, low-energy series equipment (5) Pay attention to environmental protection and production safety 1.2 Procedures and trends in the design of the concentrator 1. Steps in the design of the concentrator The design of the ore dressing can be divided into: pre-design work; design work; completion summary work in three stages according to the work steps. According to the current capital construction procedures, the design work phase is divided into two steps and three steps. The two-step design refers to the preliminary design and construction drawing design. Three-step design refers to preliminary design, technical design and construction drawing design 2. Development trend of mineral processing plant design Equipment energy is low in consumption, equipment specifications are large, production process is automated, and the design process is computerized. 1.3 Determination of the size of the ore dressing plant 1. Principles for determining the design scale of the concentrator Product requirements, one-time construction and phased construction, decentralized construction and centralized construction, and concentrator service life 2. Division of the size of the concentrator According to China's resource situation and ore type, the scale of the ore dressing plant is divided into three types: large, medium and small, as shown in Table 1-1. Laser Marking Machine,Fiber Laser Marking Machine,Portable Laser Marking Machine,Automatic Laser Marking Machine Shenzhen You Kong Laser Technology Co., Ltd , https://www.youkonglaser.com
1. Design of the concentrator 