Technology innovation "high benchmark" for high-power LED lighting
The main purpose of poultry chilling is to suppress the development of pathogenic microorganism and spoilage microorganism. Many researches show that the two microorganisms on the surface of carcass are largely reduced after chilling process. There are two main chilling method: water chilling and air chilling. At first, people tend to adopt air chilling in the chicken plucking process, instead of immersed chilling and drum-type chilling, for the consideration of chilling speed. While the modern research data doesn't support this point, and it shows that the chilling speed may affect the flavor, quality and appearance of meat, and shock chilling will cut down the meat quality, and slow chilling will cause PSE meat.
in Water chilling area, it contains water screw chiller, and water cooling units(water cooling system or ice flaker).for wather cooling units,it is for lower the temperature of water in the screw chilling, so that when pre-chilling the chickens, it can keep chickens in low temperautre(4-10°C),but different water cooling units have different effect.
also you can choose CONNECT Air chilling line. It is in one room,like a cold room. one automatic conveyor line is moving from outside to another side.and in this room,it is equiped with cold room equipment.
Screw Chilling, Air Chilling, Chicken Water Pre-Chilling, Chicken Air Chilling Connect Group For Poultry Project , https://www.connectpoultry.com
LED energy-saving lighting is known as the third lighting revolution. Related data shows that the same wattage of LED lights saves 8 times the efficiency of high-pressure sodium lamps and 3 times that of ordinary energy-saving lamps.
However, if the heat problem of the LED lamp is not solved, the temperature of the LED lamp will rise, resulting in a decrease in the brightness of the LED (ie, light decay). They are like a spell on the LED head, which is not well handled. Life expectancy will be discounted. Heat dissipation and light decay have been plaguing domestic LED producers.
As a provider of high-power LED lighting equipment and system solutions, Xiamen Ge Green Energy Optoelectronics Co., Ltd. specializes in R&D and innovation of core technologies such as heat dissipation, light distribution, mechanical structure, electrical and electronic, industrial design, and established R&D team in 2007. At the beginning, I was extremely concerned about the research on heat dissipation and light decay of LEDs.
Two patent technologies have created core competitiveness After nearly 7 years of research and development, Ge Green Energy has obtained more than 40 intellectual property rights authorizations at home and abroad. It is a pilot unit of intellectual property rights in Xiamen, in which non-imaging microlens parabolic reflectors are integrated with light distribution. Technology and sodium-millimeter vacuum superconducting tube cooling technology have become the company's two core invention patent technologies, with strong competitive advantages in the market.
It is understood that Ge Green can use the patented advanced nano heat pipe cooling technology on the heat dissipation of LED, and use the superconducting nano heat pipe to dissipate heat, which can quickly and powerfully remove heat, effectively ensuring the luminous efficiency and luminous flux of LED lamps. The rate continues the overall life of LED lamps. The staff introduced that after the street lamp products have been used continuously for more than four years in the urban area, the light decay is only 3, far better than the technical level of the industry not exceeding 30 in 3 years.
On the other hand, they use the lens and the reflector to integrate the secondary light distribution. Through precise optical path design, the light is controlled accurately in the illumination area, showing a perfect spot, not only the light distribution is uniform, but also seamlessly connected. Ghosting, no blind spots, good color rendering, and effectively avoid glare problems.
Green Green also uses the modular design of the luminaire to meet the LED outdoor lighting of 15W600W different power applications. Modular design of the luminaires can be replaced only for the replacement of the components, the relevant staff said that this is both cost-effective and easy to operate, in addition to the modular combination of up and down hollow, due to The heating element is broken up into individual modules, and the air can pass through the modules very smoothly, and the heat is quickly taken away. This makes Green's LED products more competitive in high-power, high-efficiency LED products of the same type.
Making urban lighting smarter Energy efficiency is especially necessary in today's ever-increasing demands and quantities of urban road lighting and landscape lighting. Green Green can adopt intelligent management system in urban public lighting system to achieve energy conservation and reduce resource waste. According to reports, through the construction of advanced street lighting monitoring system, it can implement unified opening and closing or dimming of urban lighting, real-time monitoring and management of night lighting systems and street lights, ensuring efficient and stable operation, all-weather operation, and controlling unnecessary night light lighting. To achieve real-time on-demand lighting, effectively saving power consumption.
The LED lighting fixtures we use intelligent control technology can be connected to the lighting control system to perform centralized control, individual control or group control for each luminaire to achieve linear changes in brightness, color temperature, color, etc., or to set different scene modes. Plan tasks, energy consumption monitoring, health status monitoring of lamps, etc. Not only can you save energy, but you can also manage lamps efficiently. In addition, the lighting in the intelligent control system can be controlled not only by computer but also by other mobile terminals such as mobile phones and iPads.
This intelligent lighting control system can be widely used in intelligent remote control of lighting systems such as LED street lights, tunnel lights, high pole lights, and outdoor lighting places such as ports, docks, highways, tunnels, urban roads, etc. Intelligent remote control of indoor lighting systems such as hotels, office buildings, homes, and underground buildings.
This year, the green LED lighting standards and LED road intelligent lighting technology standards led by Green Green were included in the 2013 Fujian Provincial Local Standards Revision Program.
The company is welcoming the harvest period. We are waiting for the coming of the LED lighting era. At that time, LED will no longer be a lighting substitute, but truly become a necessity in human life. Liao Liangbin, general manager of Green Energy, said that with the continuous enhancement of R&D strength, technology development and cost reduction, Greentech's cost performance has been continuously improved. He hopes that one day LED lighting products can truly enter the homes of ordinary people and enter thousands of households.
In the view of Green Green, reducing costs is not a simple shoddy, but should be throttled from the source of technology. According to reports, on the one hand, Green Green can reduce the waste of materials through the reasonable design of the heat dissipation system of the lamps; on the other hand, it improves the light output efficiency per watt of the lamps, improves the cost performance, and continuously reduces the production by standardizing the production of modular products. The cost makes LED lighting truly compatible with civilian consumption.
Having autonomous core technology is the secret of a company's long-term success. Liao Liangbin said that the output value of Green Energy will exceed 100 million this year, and it is expected to double next year. We will welcome our harvest next year. He said with full expectation that in the past few years, he has been laying the foundation, investing 250 million yuan to build a new production base, investing in research and development, giving products to customers for free use and testing, and next year, many customers have tried for one or two years, the market It is expected to usher in a major breakthrough.