It's easy to brake and it's hard for the brake driver to be a good driver
Instant Noodles Packing Machine Plastic Bag Packaging Machine,Instant Rice Packaging Machine,Soap Pillow Packaging Machine,Puffy Food Packaging Machine Jinan Guoqiang Machinery CO,.ltd , https://www.jinanpackaging.com
As the saying goes, "It's hard to drive a car, it's a driver who drives it, and it's a good driver to brake." Most of the traffic accidents are caused by insufficient braking. On the one hand, this is closely linked to the physical and environmental factors of the vehicle. But on the other hand, reasonable braking skills in driving can avoid a lot of unnecessary traffic accidents. Let's talk about the brake skills of the vehicle and master the priorities.
Standard brakes <br> <br> long-distance roads in good condition, the case is far direction intersection traffic lights, whether it is in the red, yellow green light to state, or the state of green vehicles should slow down, be prepared to stop or low speed by intersection. Long-distance perfect braking is like the feeling of a high-speed train entering the station. There is no impact feeling at all. To do so, first judge the intersection of the traffic light, throttle the throttle, let it slide after the oil is collected.
Many trainees or some students learning to use the car, after receiving the brake command, due to lack of experience, will use rough braking behavior, this will not only greatly reduce the ride comfort, but also affect the safety (prone to rear-end rear-end), in addition to fuel consumption Not economical.
If there is enough distance, you don’t need to step on the brakes to let the inertia of the vehicle maintain the low speed of the vehicle to save the fuel consumption. If the distance is not enough, after the oil is collected, start to lightly press the brake and let it slow down smoothly until the vehicle stops or the speed is low. This period is a comprehensive judgment result of a complex distance, vehicle speed, and braking performance. The user needs to accumulate a comprehensive understanding of his vehicle for a long time before implementing it. If it is a new car or borrowing another vehicle, it is better to have a certain amount of early redundancy. .
City traffic with car brakes
In the urban traffic, especially in the morning and evening peak periods, it is basically in the state of following the car. This time, the brakes need to be frequently used. A skilled driver can make the starting and braking smooth, and there is no strong sense of pushing or nodding. Theoretically, the necessary distance between vehicles should be maintained. However, this kind of domestic atmosphere needs to maintain a body or shorter distance with the preceding vehicle, which puts a higher demand on the driver's braking skills.
Reasonable skill at this time is: According to the road conditions and reasonably reduce the speed, when found that the front of the car began to brake (brake lights lit) will be placed on the brake pedal, even afterburner, smooth deceleration to the same speed as the previous car, keep the brakes Pedal position, and then observe the speed changes in the front of the car, adjust the braking force. If the speed of the preceding vehicle no longer decreases, you can slowly release the brake pedal, accelerate forward, and continue to follow the car at the same speed as the preceding vehicle.
<br> <br> mountain road mountain road brake first to the reasonable control of speed, often encounter narrow road, accompanied by a turn on the downhill, we must take preventive brakes to avoid the emergency brake, emergency brake mountain, it is easy to cause the vehicle to skid , out of control, very dangerous.
A reasonable approach is to drive at a limited speed, with tips such as cornering, advance oil, and lightly apply the brakes, but release the brake pedal faster than the road, so as to ensure that the vehicle speed does not fall excessively. Manually blocked models can easily lead to inappropriate gear positions due to excessively fast speeds. Too low gears can cause the body to shake. Therefore, you must pay attention to timely shifts after the brakes on the mountain. If you have more hands, you need to practice more, or Simply buy an automatic file
Long downhill brake <br> <br> long downhill, with gravity acting role, if not for oil, vehicle speed will be higher and higher, this time to remember not to let the vehicle speeding. Many novice drivers will take the brakes downhill to avoid faster speeds. In fact, it is wrong to do so. After a long period of work on the vehicle brake system, thermal degradation will occur, resulting in degraded brake performance or even failure. The correct approach is to place the gearbox in a lower gear, make full use of the engine brake, and lightly apply the brakes properly, and then slowly put away and continue to lightly apply the brakes to ensure that the speed is controlled within a safe range.
Cornering brake <br> <br> detour to follow the corners before braking, deceleration slow into the corners, then accelerate out of the corners. When the brakes are on the bend, they must use the direction and adjust the body posture at any time along the arc of the detour. Do not slam on the brakes, especially on the outside lanes of the vehicle, to avoid losing control of the body.
Brake <br> <br> rain conditions in the dry road driving, the vehicle speed increases, the friction coefficient of the tire and the ground is almost no change, and in the wet road surface, the coefficient of friction increases as the vehicle speed decreases sharply. This is equivalent to the fact that the braking force also decreases with the friction coefficient, and the braking distance also increases accordingly. If you are not an experienced driver, it is difficult to have an accurate judgment of the braking distance in rainy weather. At this time, it is necessary to ensure that there is a sufficient distance from the vehicle in front, and the speed should not be too fast. Listen to traffic tips. Driving will also reduce the accident rate.
Driving on a rainy day will inevitably lead to a road area water area, but it is not a matter of seeing water and flashing, or putting a brake on the brake slowly. This is a common problem for most drivers. In fact, both methods are very dangerous. There is no doubt that the follower driver does not know how to avoid and increase the occurrence of rear-end accidents; it is also very dangerous to slam the brakes in front of the stagnant water area or in the stagnant water area. In addition, the rear brakes are also prone to rear-end accidents. After the car has slipped, the brakes will not have any protection, and the brakes will cause other more dangerous situations.
Emergency brake <br> <br> who do not want to drive in case of emergency, but this thing is not an individual will transfer. In the event of an emergency, it is not a light step on the brakes. At this time, do not be afraid to nod and direct the brakes to the end. For vehicles without an ABS system, you need to quickly release the brake pedal and then step on the pedal after the first step.
There is also a critical point, that is, do not forget to brake the steering wheel and forget about the control of the steering wheel. A lot of people's mind blankness is largely forgotten the control of the car, focusing on the brakes in an emergency situation is to fill your mind blank through contact, because in a few seconds you are very likely to Avoid a traffic accident. If it is good to let the car stop in front of an obstacle by using a brake, if it does not, then you have to consider whether you can avoid it. Emergency evacuation is braking and merging. The method is to use the direction of the brake at the same time, bypass the obstacles, and drive to the next lane.