YPAI-YPAIII Ironing Machine:
Ironing machine, Industrial ironing machine, Commercial ironing machine, Automatic ironing machine, Ironing machine for bed sheets, Flatwork ironer, Flatwork ironing machine, Roll ironing machine, Industrial ironing machine for bed sheet, Marine ironing machine
1. This is an automatic ironing machine with a horizontal structure, offering easy operation and high-quality ironing results.
2. It can be heated using steam or electricity, providing flexibility depending on your needs.
3. Ideal for ironing various types of fabrics such as bed sheets, towels, tablecloths, curtains, and linens commonly used in hotels, restaurants, schools, hospitals, textile factories, and laundries.
4. The roller length of the industrial ironing machine can be customized to fit different fabric widths—ranging from 1800mm to 3000mm. It can also be adjusted to less than 1800mm if required. The number of rollers can vary from single to triple, and machines with more rollers offer faster ironing speeds compared to those with a single roller.
5. The precise design of double chests, springs, and heat-resistant felt ensures even pressure distribution and a smooth surface finish. It features a unique lever balance pressure device and a cylinder pressure adjustment system on both sides. A whirl steam flow heating system improves the overall ironing performance.
6. Safe and reliable operation is ensured through multiple safety features: a finger guard that stops the machine immediately if touched, an anti-curling device to prevent fabric curling, a steam and compressed air control system with low-pressure alarms, emergency stop buttons located throughout the machine, and a pneumatic system that locks the rollers when power is lost. Additionally, a large touch screen controller allows operators to easily program settings based on different requirements.
7. High efficiency and low energy consumption are achieved through a large-angle heating surface that improves heat transfer, a single drive motor that saves energy, and a frequency converter system that adjusts the ironing speed between 8–40 m/min depending on temperature, fabric type, and moisture level. The chests are equipped with a unique steam recycling system and thermal insulation to reduce heat loss.
8. Certified with CE and ISO9001, this machine meets international quality and safety standards.
**Technical Specifications Table:**
| Model | Ironing Speed (m/min) | Steam Pressure (MPa) | Power (kW) | Electrical Heating Power (kW) | Roller Dimension (mm) | Overall Dimensions (mm) | Weight (kg) |
|-------------|------------------------|-----------------------|------------|-------------------------------|------------------------|--------------------------|-------------|
| YPAI-1800 | 0-7 | 0.4-0.6 | 0.75 | 18 | φ800×1800 | 2800×1550×1500 | 1000 |
| YPAI-2500 | 0-7 | 0.4-0.6 | 0.75 | 24 | φ800×2500 | 3500×1550×1500 | 1200 |
| YPAI-2800 | 0-7 | 0.4-0.6 | 0.75 | 30 | φ800×2800 | 3850×1550×1500 | 1500 |
| YPA II-2800 | 0-15 | 0.4-0.6 | 1.5 | - | φ800×2800 | 3850×2500×1500 | 2300 |
| YPA II-3000 | 0-15 | 0.4-0.6 | 1.5 | - | φ800×3000 | 4050×2500×1500 | 2460 |
| YPA III-3000| 0-30 | 0.4-0.6 | 2.2 | - | φ800×3000 | 4050×3430×1500 | 3460 |
This machine is perfect for commercial and industrial use, delivering consistent performance and durability. Whether you're running a hotel, laundry service, or textile factory, the YPAI-YPAIII series offers a powerful and efficient solution for all your ironing needs.
Duplex Stainless Tubes
Duplex Stainless Tubes:
ASTM A789 (ASME SA789) General purpose seamless and welded ferritic/austenitic stainless steel pipe
ASTM A790 (ASME SA790) Seamless and welded ferritic/austenitic stainless steel nominal pipe
GB/T 21833-2008 Austenitic - ferrite grades duplex stainless steel seamless steel tube
Duplex stainless steel tube/super duplex stainless steel tube is composed by and phrase organization of
the austenitic and ferritic about half and half of the proportion. For It possessed both austenite and ferrite
stainless steel characteristics, so it owns high strength and corrosion resistance of stainless steel. Usually,
in the case of low carbon content of C, Cr content is about 18% ~ 28%, Ni content is about 3%-10%, Some
steel contain Mo, Cu, Nb, Ti, N and other alloy elements.Compared with ferrite, plasticity and toughness is higher
, there is no room temperature brittleness, intergranular corrosion resistance and welding performance were
significantly increased, while maintaining a ferritic stainless steel of 475 ℃ brittleness and high thermal conductivity,
it has the characteristic of superplasticity. Compared with austenitic stainless steel, the yield strength increased
significantly, the resistance to intergranular corrosion, stress corrosion and corrosion fatigue and abrasion
performance improved significantly.
Stainless Steel Tubes,Duplex Stainless Tubes,Duplex Stainless Pipes,2205 Duplex Steel Pipes
Ningbo Huijie Steel Pipe Manufacturing Co.,Ltd , https://www.hjbearingtube.com