Motor Copper Wire Recycling Machine

1. Wires and cables are fed into the crusher, where they are broken down and the copper is separated from the plastic sheath. The size of the crushed material depends on the mesh size of the sieve, with larger meshes producing longer pieces and higher output. The appropriate mesh should be selected based on the type of material being processed.
2. The resulting mixture of copper granules and plastic pieces is conveyed to the separator. During this step, dust and lightweight plastic fragments (such as fibers, ropes, or tapes) are collected by the pressure-reducing blower. This blower is connected to a dust collector equipped with a dust collection bag, preventing environmental pollution. When the bag is full, the collected dust and debris can be removed.
3. The vibrating separator uses differences in physical properties and specific gravity between materials to separate copper granules and plastic pieces. By adjusting the speed of material movement and vibration amplitude, copper granules (with higher specific gravity) move to the bottom and upward, while lighter plastic pieces move to the top and downward. Both materials are then discharged through different outlets.
4. All components are mounted on the underbed, forming a compact unit. The machine is pre-adjusted before shipping, so the customer only needs to connect it to the power supply for immediate use.

Motor Copper Wire Recycling Machine Technical Parameters: 

ModelÂ	Recycling capacity	Processed wire dia.	Total power	Voltage	DimensionÂ	WeightÂ
QJF-400-1	80-100kg/h	    0.3-20mm	11.92kW	    Adjustable	1.5*1.5*1.9m	750kg
QJF-400	200-300kg/h		23.12kW		2.7*1.9*2.3m	1200kg
QJF-600A	300-400kg/h		48.36kW		4*1.85*2.4m	3400kg
QJF-600	300-400kg/h		52.36kW		4.3*1.95*2.4m	3400kg
QJF-800	600-700kg/h	0.1-40mm	75.4kW		9.1*2.3*3.54m	8000kg

   
Motor Copper Wire Recycling Machine Different Models:  




FAQ 
 1. Is there any quick-wear part on the machine? 
The main wear parts are blades and screens, which have a service life of over 2 years. We also provide blade sharpening machines for maintenance.
2. What's the maximum continuous working time for the recycling machine?   
Normally, it can run for 10 hours per day. 
3. Is the machine easy to operate? How many workers are required? 
We have designed a precise yet simple control system for the machine.
For a single recycling machine, one worker is sufficient.
For a complete recycling line, two workers are needed.

Contact Information:  
Attn: Tina Ge 
Mobile: +86 159 8192 5357 
 
 

Electrolysis Cell

Electrolysis Cell, Water Electrolysis System, Electrolyzer Cell Technology, Hydrogen Production Electrolysis, Industrial Electrolysis Solutions

Yesino Metal Co., Ltd , https://www.yesinometal.com