Working fire in Riverwoods, 11-26-17
Firefighters from Deerfield-Bannockburn and Lincolnshire-Riverwoods FPD were dispatched to 601 Eagle Court in Riverwoods on Sunday afternoon after reports of a fire in the rear of the house. Neighbors saw flames and called emergency services. Before any units arrived, the alarm was upgraded to a Code 4 working fire, indicating that the home was already heavily involved. Lincolnshire Engine 52 was the first to arrive and found visible flames in the back of the structure. They reported that the fire was on the exterior, and quickly began suppression efforts with a hose line. Deerfield Engine 20 arrived next and assisted in extinguishing the blaze. The fire was under control within minutes, and the remaining responding units were held on standby as no further action was needed. Larry Shapiro photo Larry Shapiro photo Larry Shapiro photo More photos from the scene are available at Shapirophotography.net. No injuries were reported, and the cause of the fire is currently under investigation. Local residents have been advised to remain cautious and report any suspicious activity. Fire officials praised the quick response and coordination between departments, which helped prevent the fire from spreading further. Categories Pneumatic Cylinder Kits,Air Cylinder Kits,Pneumatic Air Cylinder Kits,Aluminum Cylinder Kits Foshan Weiyingjia Technology Co., Ltd , https://www.wyspneumatic.com
Cylinder assembly accessories include one front cover and one rear cover, one piston, two Y-type piston seals, one hard-wearing ring, one set of magnetic rings (some cylinders do not have magnetic rings), two cylinder seal O-rings, one piston rod sealing ring, one dustproof, two buffer caps, two buffer screws (with O-ring), one piston rod end thread, one piston fixing bolt, 8 fixing bolts, dustproof air inlet and outlet two caps, one piston rod end thread protection cover.Air Cylinder Tube.
Because the different application needs different strokes of air cylinders, for dealers and distributors, storing a large number of cylinders with fixed strokes will occupy a large amount of inventory funds.Pneumatic Cylinder Tube.
However, storing the Pneumatic Cylinder assembly parts can solve this problem very well. When requires different strokes and then temporarily assembling the cylinder accordingly.Air Cylinder Barrel.
Common cylinder assembly parts include DNC square cylinder series, ISO standard Metalwork series, SI Mickey Mouse type ISO 15552 cylinder series, SC and SU AirTac standard cylinder series, SDA compact cylinder series, and DSN, MA, MAL mini air cylinder series, etc. .
Matters needing attention when assembling the cylinder
For non-professional cylinder manufacturers, we do not recommend self-assembly to avoid problems caused by incorrectly assembling cylinders.
The following points need to be paid attention to when assembling an air cylinder by yourself:
â—† The inner edge of a pneumatic cylinder needs to be chamfered to facilitate the entry of the piston and sealing ring into the cylinder tube.
â—† Before assembling the piston and cylinder, lubricating grease must be applied to the inner wall of the cylinder to reduce the friction between the sealing ring and the inner wall of the air cylinder.Pneumatic Cylinder Barrel.
â—† The edge of the piston rod end also needs to be chamfered to reduce damage to dust and buffer seals.Pneumatic Cylinder.
â—† Because the end of the piston rod has external threads, special attention should be paid when assembling the piston rod and the front end cover. It is necessary to use the end of the piston rod without threads to pass through the gasket. Otherwise, the inner wall of the gasket is easily cut by the threads and resulting in an air leakage.
â—† For the installation of the tie rod cylinder, it is also necessary to pay attention to the position of the tie rod thread, so that there is enough thread space in the fixing bolts of the front and rear end covers to install the cylinder accessories such as CA, CB mounting brackets, FA/FB flange brackets.Cylinder Tube.