Fully Automatic Pet Bottle Blow Molding Machine Plastic Container Making
Product Description
Brief Introduction:
YAOVA has rich experience to design various reheat stretch blow moulding equipments. After years of R&D, now we introduce the latest economical stretch blow moulding machine to the market. The YV-A is an economic two stage automatic stretch blow moulding machine, which is mainly designed for the PET and PP stretch blow bottles. The YV-A consumes less power due to optimized machine layouts and patented perform heating system, so the end of user can achieve maximum profit in today's competitive bottle moulding market.
2000ML 4Cavities Automatic PET Stretch Blow Moulding MachineÂ
FA-2000-4 Basic Specification:
PET preform loading automatic;
Auto-fault detection;
Slider type: 33pcs of slider in total;
16pcs of heating lamp;
Container volume: up to 2000ml;
Bottle neck range: 14mm -Â 45mm;
Output (Bottle per hour): 4-cavity:around 3600.
FA-2000-4 Working Condition:
Power supply: 380VAC/50Hz(depending on client's country)
High pressure: 2.4m3/min, 3.0Mpa
Low pressure: 2.0m3/min, 1.0Mpa
Air dryer: 3.0m3/min, 3.0Mpa
Air tank: 1.0m3/min, 3.0Mpa
Water chiller: 5HP
Technical Specification:
2000ML full automatic pet stretch blow molding machine
Category
Item
Unit
FA-2000-4
Product specification
Max volume
ML
2000
Output
pcs
3600
Body diameter
mm
100
Bottle height
mm
300
Neck diameter
mm
14-45
Mold
Cavity
cavity
4
Clamping stroke
mm
120
Max Strtch stroke
mm
400
Bottom Moving stroke
mm
40-70
Clamping force
T
70
Power
Votage standard
--
220/380/415V
50/60 HZ
3 phase
Total power
kw
48
Actual use power
kw
19
Air source
HP air compressor
--
2.4 M3/min
3.0 Mpa
LP air compressor
--
2.0 M3/min
1.0 Mpa
Air tank
--
1.0 M3/min
3.0 Mpa
Air dryer
--
3.0 M3/min
3.0 Mpa
Machine specification
Machine(L×W×H)
m
3.2*1.9*2
Machine weight
kg
3200
Preform loader(L×W×H)
m
2*1*2.4
Loader weight
kg
3450
Main Features
1) This machine is suitable for making mineral water bottles,carbonated beverage bottles, daily chemical bottles ,oil bottles etc less than 2000ML.
2) Use the advanced touch-screen computer control ,easy operation,stable quality and high safety.
3) Use the electric appliances and pneumatic components of worldwide famous brands, stable and accurate velocity.
4) The whole production process is finished by the automatic micro-computerized control, auto-fault detection,automatic alarm , each action has interlocking device as a security guarantee.
5) The gas circuit is designed into low-pressure and high-pressure twice blowing and action three portions,making sure of an even bottle forming and blowing a steady action.
6) The blower is reasonably designed ,smooth running ,with the production workmanship flow fully automatic,and holds less investment,high efficiency ,easy operation,simple repair, safety etc.
7) Advanced match mould structure , stable running ,powerful mould locking strength.
Â
Detailed
Controller system
The new microprocessor has more storage memory; it saves the operating setting up to 30 sets. Re-programmed software detects any possible errors permitting immediate identification and diagnosis of the problem.Â
Preform Feed
The preform stocked in the hopper are transported by conveyor and are sorted neck upwards for the feed ramp in to the perform oven automatically, the performs are now read to enter the oven equipped with its infra-lamps.
Â
Blowing station
Improved blow station fits with the blowing molds up to 2.5L. Thanks to the compensation unit, the new speedy clamping system allow you to blowing the bottles with pressure up to 40 Bar with perfect parting line on the bottles. And another major benefit is the fast mold changing over time.
Linear transport oven
The heating of the performs is optimized by the new modular oven with 9Â layers of heating lamps. It guarantees the ideal temperature for quality blowing. The preforms self rotated by frictional belts during the continuous movement. Due to the small gaps between the preforms, it requires less electric costs. we called as economic running.
Â
Welcome To TONVA
Â
Â
Â
 Our Service
* Reply the email and take action in 24 hours.
* 100% Quality inspection before the shipment.
* Can training clients operator for free in seller's factory.
* Engineer overseas is available.
* Blowing mold and injection mold made original.
* Auxiliary machines for complete line.
* Customized design as requirements.
1,Instruction for Installation and Debugging:
Before delivery, TONVA takes responsiblity for debugging of machine, in order to make sure provided machine could be safely and smoothly put into operation.
TONVA also take responsiblity to have debugging overseas, and clients aborad please first send invitation,then provide our engineer with round-trip tickets,accommodation,vehicle and USD80 per day for salary.
2,User Training:
Before delivery, TONVA will take responsibility to indoctrinate technical training to the users so that they could understand machines' features and could operate the machine by themselves.
3,Warranty Period:
The waranty period for TONVA machine is one year with a life long maintenance. If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement.
Â
 Contact Us
Â