DIN436 Stainless Steel 304/316 Square Washer

May 12, 2020

  • Model NO.: DIN436
  • Material: Stainless Steel
  • Combination Washer Packaging: All Inclusive
  • Available Material: Carbon Steel, High Strength Steel, Stainless Steel
  • Trademark: HN
  • Specification: ISO9001: 2008
  • HS Code: 731815
  • Type: Flat Gasket
  • Combination Washer Structure: A Type
  • Spring Washer Type: Standard
  • Class/Grade: 3.6, 4.8, 5.6, 6.8, 8.8, 9.8, 10.9, 12.9
  • Transport Package: 20-25kg Carton+900kg/Pallet
  • Origin: China
DIN436 Stainless Steel 304/316 Square Washer

Product Description:
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID).

· Washers are usually metal or plastic. High quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied.

· Rubber or fiber gaskets used in taps (or faucets, or valves) to stop the flow of water are sometimes referred to colloquially as washers; but, while they may look similar, washers and gaskets are usually designed for different functions and made differently.
Products name Square washer
Standard: DIN,ASTM/ANSI JIS EN ISO,AS,GB
Material Stainless Steel: SS201, SS303, SS304, SS316,,SS904L 
Steel Grade:Common and high strength
Finishing Zinc(Yellow,White,Blue,Black),Hop Dip Galvanized(HDG),Black Oxide,
Geomet,Dacroment,anodization,Nickel plated,Zinc-Nickel plated
   
Customized Products
Lead time		 Busy season:15-30days,Slack seaon:10-15days

Packing And Delivery
20-25kg Carton+900kg/Pallet
 

Counter Flow Cooler suitable for pellet cooling,for example:wood pellet ,feed pellet .

Advanced counter flow cooling principle ,the cooling air flow goes toward the materical flow ,to avoid sudden cooling of material by direct contacting ,and prevent material from.

Sliding discharge system for uniform,mild discharge with less reminder.

Pellet temperature after cooling is less than 3-5°C above ambient temperature.

Other equipment such as debris machine, granulating units into supporting the use of the production line.

Counter Flow Cooler

Counter Flow Cooler,Horizontal Pellet Cooler,Pellet Mill Cooler,Wood Pellet Cooler

Shandong Kingoro Machinery Co., Ltd , https://www.kingoromachinery.com