BIFMA X5.1 Chair Front Rear Stability Lab Equipment
Speaker Aluminum Basin Frame
Speaker aluminum basin frame is the production of multimedia speaker and toy horn accessories.
Private mold products: can be customized, according to customer samples or drawings for development and production.
8 Inch Speaker aluminum basin frame/Product Display
8 Inch Aluminum Frame,8 Inch Horn Aluminum Frame,8 Inch Speaker Aluminum Frame,8 Inch Audio Aluminum Basin Frame Fengshun County Boli Electroacoustic Co., Ltd. , https://www.gdfsboli.com
TNJ-023 Chair Seats Front Stability Test Machine
Introduction of product:
Bifma X5.1 Chair Front Rear Stability Lab Equipment is suitable to test the seats (such as chairs, office chairs) front stability.
Principle: Put the test-piece on the test table, blocked the front leg, apply specified force with forward 20N applied at seat loading point, check the article tends to overturn forward or not to determine the test-piece forward stability performance.
Â
Technical parameters of Bifma X5.1 Chair Front Rear Stability Lab Equipment:
Seat surface loading:Â Max:Â 600N, cumulative
Tensile force:Â 20N
Loading point position:seat surface center position,60mm from front edge
Seat surface loading pad:Â diameter:Â 200mm, camber surface:Â R300mm,9 pins
Loading rob: 19mm, both ends A type: sphere SR19mm B type: sharp surface 45 °
Weights basket lifting:Â manual control
Dimensions (WxDxH): 100x140x105cm
Weight:Â 500kg
Air source:Â 6kgf/cm2 stable air source
Standards: ANSI/BIFMA X5.1-12.4 Front Stability;EN 1022, EN 1729-2Â
Reference Tests method:
12.4.2 Test Procedure - Alternative A (See Figures 12c and 12d).
a) This alternative may only be used on chairs that do not have a seat surface that will support the stability loading fixture (i.e., mesh, web or strap seat support surfaces).
b) Apply a vertical load of 600 N (135 lbf.), through a 200 mm (7.
87 in.) diameter disk, the center of which is 60 mm (2.4 in.) from the front center edge of the load-bearing surface of the seat. (See Figure 12e for details).
c) Apply a horizontal force of 20 N (4.5 lbf.) at the same level of the plane of the top of the seat. The force shall be coincident with the side-to-side centerline of the seat.
Â
12.4.3 Test Procedure - Alternative B (See Figures 12f and 12g)
a) Apply a vertical load of 600 N (135 lbf.), by means of the front stability loading fixture shown in Figure 12g at a point 60 mm (2.4 in.) from the front center edge of the loadbearing surface of the chair.
b) Apply a horizontal force of 20 N (4.5 lbf.) at the same level of the plane of the top of the seat. The force shall be coincident with the side-to-side centerline of the seat.
Â
12.4.4 Acceptance Level: The chair shall not tip over as the result of the force application.
Function: it is the matrix of installation vibration system, support system and magnetic return system.
Material: Speaker cast aluminum basin frame, the basic function and iron basin frame work the same principle, is a relatively high-end speaker body parts. The process is more complex, the appearance is more high-end and beautiful, and the cost is also higher.
Surface treatment process: electroplating, electrophoresis, baking black. Color can also be customized according to customer requirements.
Modular products: there are a variety of different specifications for customers to choose.
